Jump to content
We're Back! Read more... ×


  • Content count

  • Joined

  • Last visited

  • Days Won


CyberStream last won the day on January 26

CyberStream had the most liked content!

About CyberStream

  • Rank
    Junior Member

Profile Information

  • Location

Contact Methods

  • Interests

Recent Profile Visitors

291 profile views
  1. CyberStream

    This is how you could get greeted on RX8club.com

    That guy's a twat. Same guy that's over the "riced out rx8" page. Basically thinks he is god because he turbod his 8 before it was cool. If I'm honest tho, I don't like rx8club. The attitude there is very bad. Ask a question at all and get shot down because you didn't search through 10k+ threads that are all 12+ years old and from a time when people knew nothing about the car. Sent from my ONEPLUS A5000 using Tapatalk
  2. CyberStream

    The odd ball 8

    Yup. Jdm an eudm both have puddle lights an they are in the same holes/wires Sent from my ONEPLUS A5000 using Tapatalk
  3. CyberStream

    The odd ball 8

    Thanks so [emoji4]. I wish I had taken more photos of the loom when I done it. I seem to do mods and only think to post pics on the forum a week or two later. Like the wiring for the Jap folding mirrors and the euro heated lenses. I have very few photos of that [emoji26]. Still. Gotta say the wire tuck is one of my favorite mods to the car Sent from my ONEPLUS A5000 using Tapatalk
  4. CyberStream

    What are you watching now, you tube videos

    Juice box unboxed [emoji28] get a good laugh out of that now to be fair Sent from my ONEPLUS A5000 using Tapatalk
  5. CyberStream

    The odd ball 8

    The most recent additins have been a Cusco strut brace and some fat wheels. Some 18"x9.5 et22s on the front and 18"x10.5 et15s on the rear Sent from my ONEPLUS A5000 using Tapatalk
  6. CyberStream

    The odd ball 8

    Got around to spraying the bumper during may. fitted the side skirts too. Nice improvement over the primer white. Damaged the bumper soon after tho [emoji28] Sent from my ONEPLUS A5000 using Tapatalk
  7. CyberStream

    The odd ball 8

    A before and after comparison of the engine. Cleaned the wiring look up too and re-wrapped it. Sent from my ONEPLUS A5000 using Tapatalk
  8. CyberStream

    The odd ball 8

    I think the first thing I should catch up on is the engine build. Back during Xmas 2016 I finished this beauty off. Since then I have racked up over 11k miles so it's safe to say I couldn't be happier with the build. Added purple parts as well,. Before it was cool to do so (looking at you nic [emoji58][emoji28]) #hipster Also got a new fuel pump and installed that Sent from my ONEPLUS A5000 using Tapatalk
  9. CyberStream

    The odd ball 8

    Well it's been a while since I was here [emoji28]. Plans have slightly changes since then. I'll have to go read through and see where I left off. [emoji25] There was a car for breaking that had an engine still in it. I bought it for the 6port stationary gears and when I got talking ti the mechanic that was breaking it he said it had been rebuilt recently but was burning alot if oil. When I opened it I found a badly damaged end plate and center plate but everything else was more or less new. I just got lucky I guess Sent from my ONEPLUS A5000 using Tapatalk
  10. CyberStream

    South East Cars & coffee

    I think there used to be one on at the heritage center in Wexford. Not sure what happened to it. Paulstown shouldn't be too far away tho [emoji106] Sent from my ONEPLUS A5000 using Tapatalk
  11. CyberStream

    The odd ball 8

    Engine wise it will be a battery relocate and an air intake for now. Body wise I'm going for a mazdatrix arch kit, some wide wheels. Probably rpf1's and then a dmac diffuser to tie the rear together. I'll need to sort the suspension out as well. Not too sure about that other than a respray or a Megan racing kit. I need to Finnish the 3" Mani back exhaust I have as well and reinforce the boot to take the wing. Then it's a respray Most of that is on hold until the summer. #brokecollegelife 🤔 Sent from my ONE A2003 using Tapatalk
  12. CyberStream

    The odd ball 8

    Thanks Rex. Unfortunately there is alot more work to be done before I'll be happy with it Sent from my ONE A2003 using Tapatalk
  13. CyberStream

    The odd ball 8

    more or less up to date now i guess. few parts missing, like the rebuild and fuel pump, and the air duct for the rad,
  14. CyberStream

    The odd ball 8

    mid summer rolled by and i decided it was finally time to rip the engine out so i could decide if i needed replacement parts with the rebuild kit. so up went the car and out popped the engine.its actually alot heavier than i thought and took a few of us to move it. but eventually it was over in my corner where i could start the strip.unfortunately when i did pull it apart i found bearing failure resulting in two worn rotor housings. luckily i found another engine for sale for cheap with a "slight bit of smoke" coming from the exhaust. since it was a 6-port version and i needed the stationary gears for my 4 port if i ever wanted it to rev past 8, i seems worth the money. took the 5 hour round trip that night and stripped it the next day. the car had been booked to be crushed by the previous owner which i though was weird at first but when i stripped the engine it was apparent he had just pumped about 3k into it only to have it fail after 3-5k miles . with only an end face damaged from the bad oil ring i got a set of brand new parts including, two new rotor housings, and a spare clutch.this also gave me two spare rotors for decorationand after a bit of cleaning they looked quite goodso while i was waiting for parts to arrive i started back on the spoiler.... and broke the window.. but found one at a local scrapyard so all was ok.. so i went back to trimming down the spoiler arms and im happy with how they turned outa week rolled by and in was still waiting for parts so out came the purple paint.. it was inevitable after all..then..parts arrived and ma exhaust came and goopy parts unfortunately the side seals were missing form the so while i was waiting for them to be sent out i started on the wiring loom. i wanted to move it from inside the engine bay to inside the fenders. there was room for it so it was just a matter of re-routing it through the available holes. to do this, i needed to pull out the dash and pass everything back through the firewall.the next step was to splice the wires going to the abs and extend them by about 1 foot. some of these were canbus and needed a different repair methodthe loom got moved into the light holes but it was still in its original position above the radiator. the drivers side needed very little work since the air pimp was removed.after i put the ecu back in the move started to take shape. next steps for hr engine bay will definitely be a battery relocate and a airbox delete so I have more room there and to top it off my Purely sticker arrived
  15. CyberStream

    The odd ball 8

    this might get a bit weird. bare with me... well its getting cold out and its this time of year that we really should show our kindness. so i decided to take a car in for the winter (http://s12.photobucket.com/user/DVNNN/media/RX8/IMG_20151018_141543_993_zpssff4bd2o.jpg.html)ive been looking at Mazdas for a while. i wanted a mx5 for my first car. but i wasn't aloud one.... so now that i have a bit of money saved i decided it was time to re-explore the market for a mazda. funny enough a mx5 is more expensive than one of these. :confused: so after about a month of looking and some saving here and there i found this. it needs an engine, but thats half the fun. (http://s12.photobucket.com/user/DVNNN/media/RX8/IMG_20151018_141557_494_zpsmpwmoh9k.jpg.html) (http://s12.photobucket.com/user/DVNNN/media/RX8/IMG_20151018_141606_768_zpsle0opgpm.jpg.html)ok so its time for some better pics those black bump stops on the doors are coming off sooo dam fast!! over all im very happy with her. she is what we would call "mint" so this is how the struts turned out. they look clean and factory spec witch is what i wanted. (http://s12.photobucket.com/user/DVNNN/media/RX8/IMG_0469_zpsefv6mobr.jpg.html)also they have a holding point witch is perfect for car meets (http://s12.photobucket.com/user/DVNNN/media/RX8/IMG_0473_zpsldmb8clt.jpg.html) (http://s12.photobucket.com/user/DVNNN/media/RX8/IMG_0474_zpsrkz3gctp.jpg.html)and the struts fully close when the bonnet shuts, and fully extends when the bonnet is open to the exact same height that the bonnet support use to sit. (http://s12.photobucket.com/user/DVNNN/media/RX8/IMG_0478_zpsxbybrz9x.jpg.html) (http://s12.photobucket.com/user/DVNNN/media/RX8/IMG_0479_zps3qirnrwp.jpg.html)over all this easy mod freed up a bit of access space to the engine bay and really transformed the look of the engine. all my future mods will be a little bit easier now, and working with it will be just that bit nicer. definitely a mod i would recommend! (http://s12.photobucket.com/user/DVNNN/media/RX8/IMG_0481_zpsfstgbtb9.jpg.html) first job will be to clear a space in the shed and give it a wash. i have some boot struts that i will be putting onto the bonnet, just like the s2000. it will be a couple small mods till i have enough money to spend on the rebuild parts. also ill get it on the lift soon to check out the under body. it will need new discs and pads with a drive boot and some other small things, nothing too expensive i hope.. so next week i have a car test coming up for my a3 so most of today was devoted to making sure it will pass first time. this included a quick wash. the rims are looking nice again but i had a bit of free time this evening to work on the rex's corner, so with the help of a friend i started wiring in some new lights which will help me through these oncoming dark winter months... its basically an outdoor 10w LED bulb but they give a perfect white light i have 4 pointing at the car, 1 on each side and 2 at the bonnet. there is a fifth over the future work bench.. although it needs alot of tidying first before it can be used for anything. just a bit more work to be done before i start seriously stripping the car, i might have a look at the air box tomorrow and clean the mafmassive difference to the quality of the light though. now you can actually see the bonnet struts.... so another quick update. i had a few friends over during the weekend to play with all the goodies that arrived. my bc br coilover parts arrived for hte a3 so now i have the full kit, (http://s12.photobucket.com/user/DVNNN/media/RX8/16-11-2015/14474568799171_zpscdo2qpzl.jpg.html)but due to someone over tightening the locknut i cant get the wheel off :/ so the a3 will have to wait a while. on the bright side tho. it passed its test and the rx8's parts arrived so we fitted them, managing to destroy a new spark plug in the process.. still dont know how we done that..... but anyway with three new plugs, and one clean ish one, with new d585 coils and leads we got her going. and pretty easily too. we couldnt get it started when it was hot, but that could be a battery/ starter issue so ill be exploring those options first. over all though im very happy to finally have it running. next thing to do is buy shares in a fuel company.. [emoji14] not much really happened on the mazda front... i was devoting this weekend to just my audi. but late thursday evening a spotted an add up on donedeal for a good price so i sent a text and on sat i picked this up (http://s12.photobucket.com/user/DVNNN/media/RX8/23-11-20105/IMG_20151122_1503311_zpslxci65u5.jpg.html) (http://s12.photobucket.com/user/DVNNN/media/RX8/23-11-20105/IMG_20151122_1503251_zpsjlx3kst1.jpg.html)got it for €155 and it came with two sideskirts..... (http://s12.photobucket.com/user/DVNNN/media/RX8/23-11-20105/IMG_20151121_1958231_zpszgow58pc.jpg.html)well.. yea the cat took those :confused:in other good news, i dropped my audi (http://s12.photobucket.com/user/DVNNN/media/RX8/23-11-20105/IMG_20151123_0856011_zpslhyvs47l.jpg.html) you would be seriously supprised at how well these cars handle with a proper suspension set up and some wide grippy tires!! so a very productive weekend i started working on a bracket for the coils. that took a lot longer than i thought it would, but cost me nothing so i cant complain. i even painted it red for power. I Managed to clear all the codes on the rex bar the coolant level sensor. took it for a spin and the car feels very dead. it idles rough, no power and is a bit slow to start. that and it wont rev past 7k... signs of a stuck secondary intake valve? looks like next weeks project will be to pull the valve and clean it, and to gut the cat [gutted the cat and got a few nice chunks from it. almost modern art had a small bit of free time during the weekend so i started fitting the bumper. im almost happy with it, i need to line it up in the center, work on the edges a bit and then secure it with brackets. (http://s12.photobucket.com/user/DVNNN/media/RX8/20-12-2015/received_922781154478372_zps2vzyoqav.jpeg.html)bit of drilling involved in tying in the sides in and holding up the nose.. fiberglass for the win...... (http://s12.photobucket.com/user/DVNNN/media/RX8/20-12-2015/IMG_20151220_124034_zps1fnfylgy.jpg.html)a friend came over to get some work done on his car so while we waited for his exhaust to cool, we drew some pretty circles and made it look like the car was blushing. (http://s12.photobucket.com/user/DVNNN/media/RX8/20-12-2015/IMG_20151220_165209_zpsqlqojg1m.jpg.html) (http://s12.photobucket.com/user/DVNNN/media/RX8/20-12-2015/IMG_20151220_165647_zpsry8irleq.jpg.html) seriously considering some rocket bunny lights the first update was that the drift wing finally arrived and dam is it big. decided to rest it on a tire and get an idea of how the car would look. the wings were off to i could get an idea of how much space was hidden behind the fenders. love the rough and ready look it had tho.i got a glimpse of what my sticker would look like for rexy. still needs a few tweaks thoalso my suspension arrived. ive used BC BR's in the past before and i love them so when i seen a set for sale it was an instant snatch and grab And with that, the College semester ended and ironically i had even less time to work on the car. the day after my last exam i started work and only returned home on weekends. still though it was money in the bank and thus, car parts could be bought. while i was waiting for parts to arrive i bought some steal bar and made up some brackets and arms. and then bolting it in place. ill have to reinforce this area later but for now its good.with the arms in place i could start working on the height for the wing. and im vary tempted to go full battle stance... i had a quick look at the side skirts too, but ive decided to wait till im putting the arch extensions on aswell. that wat i can flare the rear of the skirts out to meet the flares. somewhere here i managed to get time to install some 585-r coils and a Mishimoto rad.....